Electric 2000 Series Crane

THIS SERIES HAS BEEN DISCONTINUED

 

  • Heavy-duty industrial grade contactors. No automotive-grade solenoids used.
  • Power rotation utilizes robust, all steel turntable bearing with self-locking worm gear final drive.
  • Boom positions at 0°, 35°, and 55° for flexibility needed to adapt to any job.
  • Industrial planetary hoist provides fast line speeds, power efficiency and rugged dependability.

Maintainer 2000R & 2001R cranes come complete with 25’ power cable, a crane ground cable, a 225 amp fuse, a 4’ frame grounding cable, 16’ remote control pendant, mounting bolts and owner’s manual.
600 amp CCA battery and 100 amp alternator recommended. Stifflegs recommended for most installations.

Find a Dealer Request a Quote

Specifications

  • AO-02343: L2001R Short Tower (elect. 12 volt, Power Rotate) 2,000 lbs. max. cap (6500 ft*lb) Manual extend from 4’ to 6’ 6”, 16 ft. tethered remote, crane is painted standard powder-coat white (consult factory for other colors), installation included.
  • AO-02344: L2000R Tall Tower (elect. 12 volt, Power Rotate) 2000 lbs. max. cap. (6500 ft* lb) Manual extend from 4’ to 6’ 6”, 16 ft. tethered remote, crane is painted standard powder-coat white (consult factory for other colors), installation included.
  • AO-02346: L2001 Short Tower (elect. 12 volt, Manual Rotate) 2000 lbs. max. cap. (8000 ft* lb) Manual extend from 4’ to 6’ 6”, 16 ft. tethered remote, crane is painted standard powder-coat white (consult factory for other colors), installation included.
  • AO-02347: L2000 Tall Tower (elect. 12 volt, Manual Rotate) 2000 lbs. max. cap. (8000 ft* lb) Manual extend from 4’ to 6’ 6”, 16 ft. tethered remote, crane is painted standard powder-coat white (consult factory for other colors), installation included.

Features

  • Boom extends manually from 4’ to 6’6”.
  • Boom locks in 4 positions for lifting: 0°, 15°, 35°, and 55°.
  • Boom folds down when not in use on 2000R models.
  • Smooth, 12 volt planetary hoist with low maintenance gearbox, high reliability and efficient operation.
  • Hoist drum and rope sheaves meet ANSI standards (18 times wire rope diameter).
  • 28’ x 3/16” wire rope. 30 feet per minute hoist line speed.
  • Industrial grade motor contactors. No automotive type solenoids.
  • Load block with safety latch and swivel for loads over 1200 pounds.
  • All steel worm gear rotation drive is mounted on steel slewing ring crane bearing and provides power rotation.
  • Powder coat finish for high gloss and durability.
  • 16’ non-metallic remote control pendant controls hoisting and rotation.
  • Polymer wire rope pulleys are permanently lubricated to extend life and reduce wire rope wear.
  • Mounting bolts provided (4 ea. 3/4” dia. Gr. 8).

Brochures

More Information

Request

Request More Information

Fill out the form below and we'll get back to you in no time flat.